Internal Rechargeable 18 Wheeler Tire Pressure Monitoring System
Product parameters
| Receiver(26 tires) | |
| Display interface | LCD segment code (26 tires with the same display) for receiver |
| Receiver port | Vehicle battery, ACC input and RS232 output |
| Machine weight (excluding packaging) | 230g±5g |
| Abnormal self-recovery | Toggle Switches(The switch is facing up, restart after
disconnecting the external power supply.) |
| Working temperature | -30℃~80℃ |
| Power supply mode | Internal rechargeable lithium battery and external power supply |
| Interface voltage | Vehicle battery 24V, ACC24V |
| Internal battery voltage | 3.5V-4.2V |
| Bright working current | 12mA |
| Black working current (for data communication) | 4.5mA |
| Reception sensitivity | -95dbm |
| Dimensions | 13.5cm(length)*6.5cm(width)*2.2cm(height) |
| Warranty | within 1 years |
| Pressure range | 0psi~203psi/0bar-14bar |
| Sensor(Ordinary internal type sensor) | |
| Plastic parts material | Nylon + glass fiber |
| Shell temperature resistance | -50℃~150℃ |
| Antenna sheet material | Phosphorus copper nickel plating |
| Machine weight (excluding valve) | 16g±1g |
| Power supply mode | Button Battery |
| battery model | CR2050 |
| battery capacity | 345mAh |
| Working voltage | 2.1V-3.6V |
| working temperature | 8.7mA |
| Self-test current | 2.2mA |
| Dormant current | 0.5uA |
| Working temperature | -40℃-125℃ |
| Transmit frequency | 433.92MHZ |
| Transmit power | >-12dBm |
| Dimensions | 5.3cm(length)*3.5cm(width)*1.4cm(height)(excluding valve) |
| Warranty | Sensors Warranty Within 12 months after delivery day |
| Pressure range | 0~203psi |
| Type | Valve truck tpms |
Product attention:
Incorrectly installation will affect the use of this product or
make damage. experienced technician is preferred to install this
product. please be careful not to damage the sensor transmitter
when disassembling tires again. Valve of internal sensor is not
available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to
tie receiver by power cable, as I will damage product or effect
signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all
have electromagnetic interference. In order to avoid
electromagnetic interference, receiver is suggest to install 50CM
away from such kind of products. The best position is upper left
corner, upper right corner of A column and middle of front seats
(away from control)
There won't be notice if there is any change of products (
performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not
receive signal under some certain condition, like interference,
error operation or improper installation. If receiver can't receive
signal for 10 minutes, please drive car away from current place (
maybe there is strong signal interference ) or go to authorized
tire repair center to check is there any problem of sensor or
battery of sensor is run out( battery life maybe shorter than
normal use, as there is often abnormal condition occurs, sensor
need to send signal to warn driver.)
Esteemed customer:
Thank you for buying our Tire pressure Monitoring System (TPMS).
This system makes you more
safety when driving.It can real-time monitor tire pressure and
temperature conditions.
If detected any abnormal pressure and temperature of tires, the
system will transmit real-time voice alarm
and flash warning icon to remind the driver.
Real-time monitoring and warning can not only avoid risk of traffic
accident but also make passenger safety.
In addition, this system can effectively help improve the vehicle
comfortableness and driving
safety, reduce vehicle wear, save fuel consumption and avoid risk
of flat tire.
Please read the instruction carefully before using this product. If
there is any misunderstanding,please consult distributor or phone
customer service, thanks!
FAQ
Q1. What is the warranty for your product?
A1: 1 years' warranty.
If any quality problems on your side occured in this period, please
contact us.
Q2. Our voltage is 220v, can this be used in my country?
A2: Sure, we will provide the power supply that can work under
100-240v.
Q3. Can we costomize the size, color, logo and package of the
product?
A3: Yes, all of these can be cusomized according to your needs.
Q4. How about the delivery time?
A4: Sample order: 7-10 working days after paid for customized
products.
Batch order: 20-25 working days as per order quantity after paid.
20ft-40ft containers: 20-35 working days after paid.
Q5. Can you provide free sample or not?
A5: According to our factory's policy, customer will pay for sample
cost and shipping cost. However, for building up a bright future of
our business, sample cost can be returned after you place a batch
order over 500pcs. Hope you will enjoy cooperating with us.
