Internal Binding Type Ten Tire Truck Wireless TPMS System
component of product
High pressure warning
Low pressure warning
High temperature warning
Feature:
Fast Leakage Alert: Pressure leakage above 5Kpa within 5 seconds,
Fast Leakage Alert’s ON and “Leakage” icon appears.
High Pressure Alert: Pressure value’s even higher than highest
configured pressure limit, “High Pressure Alert’s ON.
Low Pressure Alert: Pressure value’s even lower than lowest
configured pressure limit, “Low Pressure Alert’s ON.
High Temperature Alert: Temperature value’s even higher than
Highest configured temperature limit, “High temperature Alert’s ON.
No Signal Alert: No signal accepted for a while, No Signal Alert’s
ON.
Low Battery Alert: Battery voltage’s lower than configured value,
Low Battery Alert’s ON.
Product parameters
| Receiver(22 rounds) | |
| Display interface | LCD segment code (22 wheels with the same display) |
| Receiver port | Vehicle battery, ACC input and RS232 output(about receiver) |
| Machine weight (excluding packaging) | 230gram±5gram |
| Abnormal self-recovery | Toggle Switches(The switch is facing up, restart after
disconnecting the external power supply.) |
| Working temperature | -30℃-80℃ |
| Power supply mode | Internal rechargeable lithium battery and external power supply |
| Interface voltage | Vehicle battery 24V, ACC24V |
| Built-in battery voltage | 3.5V-4.2V |
| Bright working current | 12mA |
| Black working current (for data communication) | 4.5mA |
| Reception sensitivity | -95dbm |
| Dimensions | 13.5cm*6.5cm*2.2cm |
| Pressure range | 0bar~14bar/0psi~203psi |
| type | TRUCK TPMS FOR 10 wheeels with repeater |
| color | black |
Black color Universal internal binding type ten tire Truck TPMS For
Trailer Truck include repeater
| Sensor (internal binding type sensor) | |
| Plastic parts material | Nylon + glass fiber |
| Machine weight (excluding bind belt) | 30gram±1gram |
| Shell temperature resistance | -50-150℃ |
| bind belt material | 304 stainless steel |
| Power supply mode | Button Battery |
| battery model | CR2050 |
| battery capacity | 345mAh |
| Working voltage | 2.1V-3.6V |
| Working temperature | -40℃-125℃ |
| working temperature | 8.7mA |
| Self-test current | 2.2mA |
| Dormant current | 0.5uA |
| Working temperature | -40℃-125℃ |
| Transmit frequency | 433.92MHZ |
| Transmit power | >-12dBm |
| Dimensions : | 7.3cm(length)*2.73cm(width)*2.2cm(height)(excluding antenna) |
Product attention
Operation is not suggested during driving.
Sensor monitors pressure and temperature of tire and signal to
receiver, receiver reports pressure and temperature by number and
voice. If there is any abnormal pressure or temperature, flashing
warning icon and voice prompt will notice driver immediately.
Drivers need to check and repair the tire immediately, in order to
avoid risk of accident due to tire problem.
Tires have natural micro leakage phenomenon. It is a normal
phenomenon that pressure of tire decreases over time. Pressure
decreasing don't have directly relationship with install this
products.
It is a normal phenomenon that pressure is unstable due to thermal
expansion during driving. It don't have directly relationship with
install this products.
Incorrectly installation will affect the use of this product or
make damage. experienced technician is preferred to install this
product. please be careful not to damage the sensor transmitter
when disassembling tires again. Valve of internal sensor is not
available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to
tie receiver by power cable, as I will damage product or effect
signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all
have electromagnetic interference. In order to avoid
electromagnetic interference, receiver is suggest to install 50CM
away from such kind of products. The best position is upper left
corner, upper right corner of A column and middle of front seats
(away from control)
There won't be notice if there is any change of products (
performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not
receive signal under some certain condition, like interference,
error operation or improper installation. If receiver can't receive
signal for 10 minutes, please drive car away from current place (
maybe there is strong signal interference ) or go to authorized
tire repair center to check is there any problem of sensor or
battery of sensor is run out( battery life maybe shorter than
normal use, as there is often abnormal condition occurs, sensor
need to send signal to warn driver.)
FAQ
Q1: Could I print my own brand/ logo on the goods?
R: Sure, of course, OEM printing logo is welcomed based on MOQ.
Please show Brand Licensing and provide original logo file.
Q2. What’s the MOQ if I want to print my own brand/logo?
R: The MOQ will be decided by your customized packaging.
Q3: Can I make sample based on my demand?
R: Certainly, we have professional engineer to make a proof before
order OEM mass product.
Q4: is there stock goods? What’s the MOQ?
R: Yes, we have approx 1,000 square meters as warehouse stock to
ensure timely supply. The MOQ is 10 set.
Q5: How can I pay for order?
We accept Bank Transfer,Paypal, Western Union or Escrow for
payment.
30% deposit is allowed for mass production.
