Heavy Duty Twelve Tire TPMS Truck Tire Pressure Monitoring System
component of product
Low power warning
No signal warning
Parameter Setting
Features
Real-time monitoring the pressure and temperature, 4 tires data
displayed simultaneously
Wireless transmission technology,100% DIY installation
With built-in rechargeable explosion proof lithium
battery,panasonic cr1632
Vibration awaken controlled
Support' BAR' 'PSI' unit optional
Wireless monitor could be placed anywhere.
Product parameters
| Receiver(26 rounds) | |
| Display interface | LCD segment code (26 tires with the same display) |
| Receiver port | Vehicle battery, ACC input and RS232 output(about receiver) |
| Machine weight (excluding packaging) | 230gram±5gram |
| Abnormal self-recovery | Toggle Switches(The switch is facing up, restart after
disconnecting the external power supply.) |
| Working temperature | -30℃-80℃ |
| Power supply mode | Internal rechargeable lithium battery and external power supply |
| Interface voltage | Vehicle battery 24V, ACC24V |
| Built-in battery voltage | 3.5V-4.2V |
| Bright working current | 12mA |
| Black working current (for data communication) | 4.5mA |
| Reception sensitivity | -95dbm |
| Dimensions | 13.5cm*6.5cm*2.2cm |
| Pressure range | 0bar~14bar/0psi~203psi |
| type | internal binding type sensors |
| color | black |
| Sensor (internal binding type sensor) | |
| Plastic parts material | Nylon + glass fiber |
| Machine weight (excluding bind belt) | 30gram±1gram |
| Shell temperature resistance | -50-150℃ |
| bind belt material | 304 stainless steel |
| Power supply mode | Button Battery |
| battery model | CR2050 |
| battery capacity | 345mAh |
| Working voltage | 2.1V-3.6V |
| Working temperature | -40℃-125℃ |
| working temperature | 8.7mA |
| Self-test current | 2.2mA |
| Dormant current | 0.5uA |
| Working temperature | -40℃-125℃ |
| Transmit frequency | 433.92MHZ |
| Transmit power | >-12dBm |
| Dimensions : | 7.3cm(length)*2.73cm(width)*2.2cm(height)(excluding antenna) |
Product attention
Tires have natural micro leakage phenomenon. It is a normal
phenomenon that pressure of tire decreases over time. Pressure
decreasing don't have directly relationship with install this
products.
It is a normal phenomenon that pressure is unstable due to thermal
expansion during driving. It don't have directly relationship with
install this products.
Incorrectly installation will affect the use of this product or
make damage. experienced technician is preferred to install this
product. please be careful not to damage the sensor transmitter
when disassembling tires again. Valve of internal sensor is not
available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to
tie receiver by power cable, as I will damage product or effect
signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all
have electromagnetic interference. In order to avoid
electromagnetic interference, receiver is suggest to install 50CM
away from such kind of products. The best position is upper left
corner, upper right corner of A column and middle of front seats
(away from control)
There won't be notice if there is any change of products (
performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not
receive signal under some certain condition, like interference,
error operation or improper installation. If receiver can't receive
signal for 10 minutes, please drive car away from current place (
maybe there is strong signal interference ) or go to authorized
tire repair center to check is there any problem of sensor or
battery of sensor is run out( battery life maybe shorter than
normal use, as there is often abnormal condition occurs, sensor
need to send signal to warn driver.)
